Reflex Flash Duplicator Manuel d'utilisateur Page 24

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 26
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 23
For producing precise multi-projector panorama presentations.
Until now, a pin-registered camera, copystand, compound table and
much experience were needed to produce accurate butt or overlap
panoramas. The Wess Splitter, in combination with a simple color
enlarger, can provide the same results with greater speed, less aggra-
vation and at a lower cost.
A Panorama is a single image with a larger-than-normal (3:2) aspect
ratio. To achieve brighter illumination on a large screen, an image may
be divided into several slide segments, each requiring a separate pro-
jector. The segments are precisely reassembled on screen to form the
complete image. A 2-screen image offers a 3:1 aspect ratio and requires
a projector when the image needs a smooth overlap. The Splitter makes
accomplishing this with precision easy. 2 or 3-screen overlapping for-
mats or 2, 3, 4 or 6 screen butt panoramas can be made with the
Splitter, depending on which version you purchase.
The Wess Composer (SE7300)
An accessory for 35mm slide duplicating units that permits crop-
ping and combining of images. When used with a camera that
offers multi-exposure capabilities, the Composer will combine por-
tions of images or produce progressive disclosure slides, multi-col-
ored titles or combine portions of two separate images.
Key features include: ability to crop any part of a 35mm image to
square or rectangular proportions using four adjustable cropping
blades and formatting spacers; combining portions of several
images, divided by hard black lines; accurate positioning of film
chips for copying or duplication using pin or VR-registration and
the
ability to adapt to most light sources and the Wess Director.
The composer is supplied with two bases. One may be mounted on
a viewing box to preadjust the cropping blades; the second is fixed
to the light source. A set of six mounted gels, which fit into the
base, are provided for quick color changes. The base may also be
used without the slider assembly to accurately position Wess slide
mounts on the duplication unit. Fits to 2.3x2.3 (6 x 6cm) and
smaller light sources or the Wess Director and Mini-Director com-
pound tables. Adapter plates for larger light sources are available.
Dimensions are 6.5 x 7˝ (17 x 18cm) with blades extended. It
weighs 1 lb. (.5kg).
Item # WECQ............................................................................122.95
The Wess Composer and Accessories
Composer Base
(RA7305)
(Replacement.)
Item # WECB.....................
14.95
Slider Assembly
(RA7310)
(Replacement.)
Item # WESAC ..................
84.50
Format Spacers 6-Pack
(SE7305)
(Replacement.)
Item # WEFSS......................
4.95
Composer Anti-Newton Glass
Pressure Plate (RA7330)
(Replacement.)
Item # WEPFANGC............6.95
Composer Plain Glass for
Pressure Frame 5-Pack (GPV003)
(Replacement.)
Item # WEGPPFC ...............
4.50
Solid Pressure Frame
Assembly (RA7335)
(Replacement.)
Item # WESPFAC................
2.95
Six 46mm Filters
(SE7310)
(Replacement.)
Item # WEFS46C...............
19.95
Instructions for
The Composer
(LIC020)
(Replacement.)
Item # WEIBC .....................
3.95
The Wess Splitter and Accessories
50+% Standard
Positioning Plate
(SE6094)
Item # WESPP50...........132.50
50% Overlap
Positioning Plate
(SE6093)
Item # WEPP50.............132.50
50% AMI Standard
Positioning Plate
(SE6096)
Item # WEASPP50........132.50
25% Overlap Positioning
Plate
(SE6095)
Item # WEPP25.............132.50
Format/Focusing Plate (SE6100)
(Replacement.)
Item # WEFPS...................
9.95
Winder for 35mm Back (SE6110)
(Replacement.)
Item # WEWS....................
4.50
Left-Center-Right Soft Edge
Master
(SE6182)
(Replacement.)
Item # WESEMS................
5.95
Blank-Center-Center Soft Edge
Master
(SE6183)
(Replacement.)
Item # WESEMSQ.............
5.95
Splitter Alignment Master
(SE6200)
(Replacement.)
Item # WEAMS..................
1.95
Instructions for Splitter (LIC009)
(Replacement.)
Item # WEIS ......................
4.95
Splitter with 50+% Overlap (SE6000)
Produces 50+% butt-joined and overlapping formats. Extra
overlap is used to compensate for projection lens distortions,
which can be particularly noticeable in butt-joined panoramas.
Special alignment slides – which can be produced with the Splitter,
are required. The SE6000 is used with Wess 35mm 002 aperture
SP peg slide mounts. The dimensions are 9.3 x 13.5˝ (24x34cm).
Weighs 3 lbs. (14kg).
Item # WESSPP..........................................................................309.95
COPY ACCESSORIES
COPY EQUIPMENT
530
WESS PLASTIC
Overnight Shipping Available
Splitter Accessories
Vue de la page 23
1 2 ... 19 20 21 22 23 24 25 26

Commentaires sur ces manuels

Pas de commentaire